Guide · Homeowners · 3 min read · Updated 17 November 2026
Replacement Window Building Regulations and FENSA Certificates
Short answer
In England, replacing windows and external doors is controlled work under Building Regulations. Installers registered with a competent person scheme such as FENSA or Certass can self-certify and register the job, and you receive a certificate. New units must meet a U-value of 1.4 W/m²K, should not reduce ventilation, must use safety glass in critical locations and must not make escape windows worse.
Why replacement windows are controlled work
Windows and doors affect a home's energy use, ventilation, safety and fire escape. That is why replacing them in England is classed as controlled work under the Building Regulations, even where planning permission is not needed. The work must meet the relevant requirements, and it must either be self-certified by a registered installer or approved by building control.
This applies to whole windows and door sets, including the frame. Replacing just the glass in an existing frame, such as a misted sealed unit, is usually treated as a repair and does not need certifying. Adding a new window where there was none, or enlarging an opening, involves structural work and is a different matter, normally handled through building control.
Competent person schemes and certificates
Competent person schemes let qualified installers self-certify that their work meets the Building Regulations, without a separate building control inspection. FENSA and Certass are well-known schemes for windows and doors in England. When a registered installer finishes the job, they notify the scheme, which registers it with the local authority and issues a certificate to the homeowner.
If your installer is not registered, you or they must apply to the local authority building control service before the work starts, and pay its fee. Without either route, the work may not be recorded as compliant, which can cause problems when you sell. Solicitors routinely ask for certificates for windows and doors fitted since the property was last bought.
- Check the installer's registration with the scheme before signing
- Make sure the quote states who registers the work
- Expect the certificate within a few weeks of completion
- Keep the certificate with your property documents
- Ask the scheme for a copy if yours goes missing
The technical requirements
Approved Document L sets the energy efficiency standard. For replacement windows and doors in existing homes in England, the maximum U-value is 1.4 W/m²K for the whole unit. Approved Document F covers ventilation: replacement windows should not make ventilation worse, so if the old windows had trickle vents, the new ones should too, and installers will often add them anyway to keep background ventilation adequate.
Approved Document K sets out where safety glazing is needed, such as glass in and beside doors and low-level panes. Approved Document B covers fire safety, and where a window serves as an emergency escape route, the replacement must provide at least the same opening as before. Approved Document Q on security applies to new homes rather than replacements, but tested secure windows remain a good benchmark.
| Approved Document | Requirement | What it means in practice |
|---|---|---|
| L (energy) | Maximum 1.4 W/m²K | Good double or triple glazing and seals |
| F (ventilation) | Do not reduce ventilation | Trickle vents where old windows had them |
| K (safety) | Safety glass in critical locations | Toughened or laminated near doors and low down |
| B (fire) | Keep escape windows suitable | Clear opening size and easy operation |
| Q (security) | Secure windows in new homes | Useful benchmark for replacements |
Escape windows explained
Escape windows matter most in bedrooms and some rooms on upper floors where the stairs are not a protected route. They give a way out if fire blocks the stairs. Approved Document B sets out the opening size and height these windows should meet in new work. When windows are replaced, the new ones should not make an existing escape window worse, so a window that met the rules should continue to, and ideally a poor one is improved.
In practice, this often means fitting escape hinges that open the sash fully, or choosing a style with a large enough opening light. Locks on escape windows should be operable without a removable key. A good surveyor will identify which windows need to provide escape and specify them accordingly before the order is placed.
Scotland, Wales and planning permission
Wales has its own Building Regulations and Approved Documents, which follow similar principles to England but with some differing figures, so check the current Welsh guidance or ask your installer. Scotland uses its own building standards system, with building warrants and technical handbooks, so the process and the paperwork differ. Installers working in each nation should know the local requirements.
Building Regulations are separate from planning permission. Replacing windows with similar ones is usually permitted development for houses, but not for flats in many cases, and not where an Article 4 direction applies in a conservation area. Listed buildings need listed building consent. Check planning first, then make sure the installation is properly certified under building rules.
Before work starts, it is worth asking the installer to walk you through how each requirement will be met on your job. Which windows will have trickle vents, which are escape windows, where safety glass will be used and what the U-value of each unit will be. A competent installer answers these questions easily and puts the details in the quote. If the answers are vague, or the installer suggests certification is not needed for full window replacement, treat that as a warning sign and get another quote from a registered company.
Questions people also ask
What happens if I do not have a FENSA certificate?
If windows were fitted without a certificate or building control approval, a buyer's solicitor may raise it during a sale. Options include applying to building control for retrospective approval, known as regularisation, or taking out indemnity insurance. It is far simpler to make sure the installer registers the work at the time.
Do replacement windows need trickle vents?
Usually, yes. Approved Document F means replacement windows should not reduce ventilation, so if the old windows had trickle vents, the new ones should too. Many installers fit them as standard to keep background ventilation adequate, which also helps reduce condensation and mould.
Does replacing a front door need a certificate?
Yes, in England replacing an external door with a significant amount of glass, or a whole door set, is generally controlled work for energy efficiency. A registered installer can self-certify it and issue a certificate, in the same way as for windows.
Written and checked by the Windows and Doors team. Read our editorial policy.
More guides
How Much Do Replacement Windows Cost in the UK? 2026 Prices
A standard uPVC casement window typically costs £450–£900 supplied and fitted in the UK in 2026, while an aluminium casement costs £700–£1,400. Sash…
uPVC vs Aluminium vs Timber Windows: Which Is Best for You?
uPVC is the most affordable, at about £450–£900 per standard window, and needs little maintenance. Aluminium costs £700–£1,400, gives slim frames,…
How Much Does a New Front Door Cost in the UK? 2026 Guide
A composite front door typically costs £1,200–£2,400 supplied and fitted in the UK in 2026, including a multipoint lock, anti-snap cylinder and…
Misted Double Glazing: Repair the Glass or Replace the Window?
Misting between the panes means the sealed unit's edge seal has failed. The fix is to replace the glass unit, which typically costs £90–£250 per unit…
Get a free windows and doors quote
Tell us what you need and we'll come back with a clear price.
Request a quote