Windows and Doors

Guide · Homeowners · 3 min read · Updated 17 November 2026

How Much Does a New Front Door Cost in the UK? 2026 Guide

Short answer

A composite front door typically costs £1,200–£2,400 supplied and fitted in the UK in 2026, including a multipoint lock, anti-snap cylinder and threshold. uPVC doors usually cost less, while aluminium and timber doors cost more. Side panels, toplights and decorative glass add to the price. For garden openings, aluminium bi-fold doors typically cost £4,000–£9,000 depending on width and panels.

How Much Does a New Front Door Cost in the UK? 2026 Guide

Typical front and back door prices

Door prices depend on the material, the size of the opening, the amount of glass, the locking hardware and any side panels or toplights. Nearly all new entrance doors are now supplied as complete door sets, where the leaf, frame, hinges, locks and seals are made together. That gives a better seal and better security than fitting a new leaf into an old frame.

The table gives typical 2026 guide prices supplied and fitted, including removal of the old door and frame, fixing and sealing the new door set and fitting trims.

Door typeTypical 2026 priceNotes
Composite front door£1,200–£2,400Multipoint lock, anti-snap cylinder, threshold
uPVC front or back doorUsually below compositePanel or half-glazed, white or foiled
Aluminium front doorUsually above compositeSlim frame, contemporary styles
Aluminium bi-fold doors£4,000–£9,000Three to five panels
Misted glass unit in a door£90–£250Glass only, door kept

Composite, uPVC, aluminium or timber?

Composite doors are the most popular choice for front doors. They have a glass-reinforced plastic skin over an insulated core, look like painted timber from a distance, come in many colours and need little maintenance. uPVC doors are cheaper and practical for back doors and side entrances, though they are less rigid and can look plainer.

Aluminium doors suit modern homes, with slim frames, large glazed panels and flush or minimal designs. They often cost more but are very strong and stable. Timber doors suit period homes and listed buildings and can be made to any size and pattern. They need periodic refinishing but can be repaired and repainted rather than replaced.

What adds to the cost

Side panels and toplights are the most common extras. A front door with one or two glazed side panels can easily cost noticeably more than the door alone, because the frame is larger and the panels need safety glass. Decorative glass, bevelled designs and integrated letterplates also add cost. Heavier doors may need upgraded hinges.

Level and low thresholds help accessibility and suit modern homes, but they need careful detailing to keep water out, especially on exposed elevations. If the opening has to be altered, such as a rotten sub-sill, a cracked step or a lintel that needs replacing, that work is extra and priced on inspection.

  • Side panels and toplights
  • Decorative, bevelled or obscured glass
  • Upgraded locks, smart locks or high-security cylinders
  • Dual colour or bespoke colour finishes
  • Low or level threshold detailing
  • Repairs to steps, sills and lintels
  • Door furniture such as knockers, numerals and pull handles

Security features to look for

A good entrance door should have a multipoint lock, which locks at several points along the edge, and an anti-snap cylinder, which resists one of the most common burglary methods. Hinges should be robust and fixed with long screws into the frame, and the frame itself must be securely fixed to the wall. Glass in or beside the door must be safety glass under Approved Document K, and laminated glass adds extra resistance to break-ins.

PAS 24 is the security standard used in Approved Document Q for new homes in England, and many replacement door sets are tested to it. A tested rating covers the whole door set as manufactured, so the frame, locks and glazing must match the tested configuration. Ask your installer whether the door you are buying has been tested.

Thermal performance and Building Regulations

In England, a replacement external door set in an existing home should meet a maximum U-value of 1.4 W/m²K under Approved Document L. Composite and modern aluminium doors usually meet this easily, and well-made timber door sets with insulated cores and double-glazed panels can too. Good weather seals around the leaf and a properly sealed frame are just as important as the door's rating for stopping draughts.

The installation should be certified, either by an installer registered with a competent person scheme such as FENSA or Certass, or through building control. Keep the certificate with your property documents, because a solicitor will usually ask for it when you sell.

Getting a reliable quote

Measure twice and have a professional survey before ordering, because doors are made to fit the specific opening. A good surveyor checks the floor and step levels, the condition of the sill and lintel, which way the door should open, and whether there is room for a letterplate and handle on the style you want. They will also check whether the opening is part of a listed building or conservation area.

Compare quotes on the same basis: door type, core and skin, lock and cylinder specification, glass, colour, threshold, removal of the old door and certification. Lead times vary by colour and style, typically a few weeks. Fitting itself is usually done in a single day.

Questions people also ask

How long does it take to fit a new front door?

Fitting a complete door set usually takes half a day to a full day. The fitters remove the old door and frame, fix and seal the new frame, hang the door, adjust the lock and fit trims. Manufacturing lead times are typically a few weeks, longer for bespoke colours or timber doors.

Is a composite door better than uPVC?

For front doors, usually yes. Composite doors are thicker, more rigid, better insulated and look closer to painted timber. uPVC doors are cheaper and perfectly practical for back and side doors. Both can be very secure if they have a good multipoint lock and anti-snap cylinder.

Can I keep my old door frame and just replace the door?

It is possible, but most installers recommend a complete door set. A new leaf in an old frame rarely seals or locks as well, and the frame may already be worn or out of square. A full door set gives even gaps, good weather sealing and a consistent locking system.

Written and checked by the Windows and Doors team. Read our editorial policy.

Get a free windows and doors quote

Tell us what you need and we'll come back with a clear price.

Request a quote