Guide · Homeowners · 3 min read · Updated 17 November 2026
uPVC vs Aluminium vs Timber Windows: Which Is Best for You?
Short answer
uPVC is the most affordable, at about £450–£900 per standard window, and needs little maintenance. Aluminium costs £700–£1,400, gives slim frames, strong colours and suits modern homes and large glazing. Timber usually costs the most but suits period homes, listed buildings and conservation areas, and can be repaired and repainted. All three can meet current thermal rules when properly specified and fitted.
The three materials in brief
uPVC windows are made from extruded plastic profiles with internal chambers and usually steel or aluminium reinforcement in the frame. They are widely used on houses built or upgraded since the 1980s, are good insulators and need little upkeep beyond cleaning and occasional lubrication. Modern foiled finishes can give a wood-effect or coloured look.
Aluminium windows use metal profiles with a thermal break, a strip of low-conductivity material that separates inside from outside so the frame does not act as a cold bridge. Aluminium is strong, so frames can be slim and carry large panes. Timber windows use softwood, hardwood or engineered timber, finished with paint or stain, and are the traditional choice for older properties.
Side-by-side comparison
The table compares the three on the points most people weigh up. Prices are typical fitted guides for a standard casement window.
| Factor | uPVC | Aluminium | Timber |
|---|---|---|---|
| Typical price | £450–£900 | £700–£1,400 | Usually highest |
| Frame thickness | Chunkier | Slimmest | Medium to chunky |
| Colours | White, foils, some sprays | Any powder-coat colour | Any paint or stain |
| Maintenance | Clean and lubricate | Clean and lubricate | Repaint or restain periodically |
| Repairability | Limited | Good | Very good |
| Period and listed homes | Often unsuitable | Sometimes acceptable | Usually preferred |
Looks and character
Appearance is often what decides it. Aluminium gives the slimmest frames and the most glass, which suits contemporary homes, extensions and large openings. Powder coating lets you choose almost any colour, including dual colours with a dark outside and white inside. It can also be made with slim sash-style profiles, though these rarely satisfy conservation officers on listed buildings.
Timber looks right on Victorian, Edwardian, Georgian and cottage properties, especially sash windows with true glazing bars and traditional horns. uPVC has improved a lot, with sculptured profiles and wood-effect foils, and uPVC slider sash windows can be a reasonable compromise on homes without planning restrictions. However, uPVC frames are generally bulkier, and on many period streets the difference is noticeable.
Insulation, security and lifespan
All three materials can meet the 1.4 W/m²K limit that Approved Document L sets for replacement windows in existing homes in England, provided the glass, spacer bars and seals are well specified. The glass makes the biggest difference to thermal performance, so ask for the whole-window U-value rather than just the centre-pane figure. Security depends mainly on the locking system, hinges and glazing method, and many windows of each type are tested to PAS 24.
Lifespan depends on quality and care. Good aluminium frames are very durable and the powder coat holds its colour well. uPVC can last for decades, but older or cheaper frames may discolour and become brittle. Timber can last for generations if it is kept painted and any rot is repaired early, and engineered or modified timbers improve stability and durability further.
- Ask for the whole-window U-value in writing
- Check locks, hinges and handles are tested together
- Look for internally glazed or securely beaded units
- Ask about warm-edge spacers to reduce condensation at the glass edge
- Check the finish warranty offered by the manufacturer
Maintenance and long-term cost
uPVC and aluminium windows need cleaning a couple of times a year, a little lubrication on hinges and locks, and occasional adjustment. Neither needs painting. Timber needs periodic repainting or restaining, more often on sunny and exposed elevations, and small repairs to sills and bottom rails over time. Factory-finished timber windows with modern microporous coatings last longer between coats than older site-painted ones.
Over a long period, the gap in total cost narrows. A timber window that is maintained can be repaired rather than replaced, while uPVC and aluminium windows are usually replaced entirely when they fail. If you plan to stay in your home for many years, it is worth thinking about the long-term picture rather than just the fitted price.
Planning and conservation rules
In most houses that are not listed and not in a conservation area, replacing windows is permitted development, provided the new ones are of similar appearance. In conservation areas, an Article 4 direction can remove that right, so you would need planning permission and the council may expect timber. In listed buildings, replacing windows normally needs listed building consent and timber is usually the only acceptable material.
Flats have their own considerations. Leaseholders often need the freeholder's consent before changing windows, and some leases specify the material and style. Always check with your council and, if relevant, your freeholder before ordering. A good installer will ask about these points at the survey and flag any likely problems.
If you are still undecided, think about the house first and the budget second. Match the material to the age and style of the property and to what neighbouring homes have, then choose the best quality you can afford within that material. A well-made uPVC window fitted carefully will outperform a poorly fitted aluminium or timber one. Ask to see samples of each profile, open and close display windows if you can, and look at installations the company has done on similar homes nearby before you commit to an order.
Questions people also ask
Which window material is most energy efficient?
Frame material matters less than most people think, because the glass covers most of the window. uPVC is naturally a good insulator, while aluminium relies on a thermal break and timber on its density. All three can meet current thermal rules when fitted with good double or triple glazing and warm-edge spacers.
Do aluminium windows get condensation?
Modern thermally broken aluminium windows are far less prone to condensation than older aluminium frames without thermal breaks. Some condensation can still form on any window in a humid room in cold weather. Good ventilation, trickle vents and warm-edge spacers all help keep it to a minimum.
Can I put uPVC windows in a conservation area?
Sometimes. If there is no Article 4 direction and the house is not listed, replacing windows with ones of similar appearance is often permitted development. Where an Article 4 direction applies, you need planning permission and the council may expect timber. Check with your local planning team first.
Written and checked by the Windows and Doors team. Read our editorial policy.
More guides
How Much Do Replacement Windows Cost in the UK? 2026 Prices
A standard uPVC casement window typically costs £450–£900 supplied and fitted in the UK in 2026, while an aluminium casement costs £700–£1,400. Sash…
Replacement Window Building Regulations and FENSA Certificates
In England, replacing windows and external doors is controlled work under Building Regulations. Installers registered with a competent person scheme…
How Much Does a New Front Door Cost in the UK? 2026 Guide
A composite front door typically costs £1,200–£2,400 supplied and fitted in the UK in 2026, including a multipoint lock, anti-snap cylinder and…
Misted Double Glazing: Repair the Glass or Replace the Window?
Misting between the panes means the sealed unit's edge seal has failed. The fix is to replace the glass unit, which typically costs £90–£250 per unit…
Get a free windows and doors quote
Tell us what you need and we'll come back with a clear price.
Request a quote