Windows and Doors

Guide · Homeowners · 4 min read · Updated 17 November 2026

How Much Do Replacement Windows Cost in the UK? 2026 Prices

Short answer

A standard uPVC casement window typically costs £450–£900 supplied and fitted in the UK in 2026, while an aluminium casement costs £700–£1,400. Sash window replacement runs £1,100–£2,500 per window, from uPVC sliders at the lower end to timber box sashes at the top. A typical three-bedroom house with eight to ten windows usually costs a few thousand pounds in uPVC and more in aluminium or timber.

How Much Do Replacement Windows Cost in the UK? 2026 Prices

Typical replacement window prices in 2026

Window prices depend on the frame material, the size and style of each window, the glass specification and how easy the job is to reach. Most companies price per window after a survey, then add any extras such as scaffolding for upper floors, bay window structural work or specialist glass. The prices below are typical guide figures for supplied and fitted windows, including removal and disposal of the old frames and sealing the new ones.

They assume standard double glazing with a low-emissivity coating, warm-edge spacers and a gas-filled cavity, which is the norm for windows that meet current thermal rules. Triple glazing, acoustic glass, obscured glass and decorative glazing bars all add to the cost.

Window typeTypical 2026 priceNotes
uPVC casement window£450–£900Standard size, white or foiled
Aluminium casement window£700–£1,400Thermally broken, powder coated
Sash window replacement£1,100–£2,500uPVC slider to timber box sash
Misted glass unit replacement£90–£250Glass only, frame kept
Timber casement windowUsually above aluminiumSpecies, finish and glazing bars

What pushes the price up

Material is the biggest single factor. uPVC is the most affordable and performs well thermally. Aluminium costs more because of the thermally broken profiles and powder coating, but gives slimmer sightlines and a modern look. Timber is usually the most expensive, especially hardwood or engineered timber with a factory finish, and is often the expected choice for period homes and conservation areas.

Size and style matter next. Large windows need heavier glass and stronger frames. Tilt-and-turn windows, sliding sashes and windows with many opening lights cost more than a simple casement with one opener. Bay and bow windows need careful measuring and may need structural support where the old frames were holding up the roof or brickwork above, so they are always priced individually.

  • Aluminium or timber frames instead of uPVC
  • Coloured or wood-effect finishes on both sides
  • Triple glazing or acoustic laminated glass
  • Sash windows, tilt-and-turn and multiple openers
  • Bay and bow windows needing structural support
  • Scaffolding or access towers for upper floors
  • Georgian bars, decorative glass or leaded designs

Whole-house costs and how to budget

A typical three-bedroom semi has eight to ten windows. At uPVC guide prices that usually lands somewhere between £4,000 and £8,000 for a straightforward job, depending on sizes and styles. Switching to aluminium might take the same house towards £6,000–£12,000, while replacing period sash windows in timber can cost well over £15,000 for a full set. Replacing front and back doors at the same time adds to the total but often brings the overall cost per item down.

Many homeowners phase the work. They replace the worst windows first, usually on the coldest or most exposed elevation, and do the rest later. If you do this, make sure the later windows can match the earlier ones in colour, profile and glass, and ask the installer to keep a record of the specification used.

What a proper survey checks

A good installer measures every opening at several points, because brickwork is rarely perfectly square. They check the condition of the lintels above the windows, the sills and the surrounding plaster, and whether the old frames are carrying any load. In bay windows this is especially important, because older bays sometimes rely on the frames for structural support and need new posts or a beam when the windows come out.

The surveyor should also check ventilation and escape. Approved Document F means replacement windows should not reduce ventilation, which usually means fitting trickle vents if the old windows had them. Approved Document B means escape windows in certain rooms, such as some bedrooms, must still give a suitable opening. Glass in low-level and door-side locations must be safety glass under Approved Document K.

Comparing quotes properly

Window quotes can vary widely, so compare like with like. Each quote should state the frame material and profile system, the glass specification and its U-value, the type of locks and handles, whether trickle vents are included, and who handles the Building Regulations certificate. It should also say whether old windows are removed and disposed of, and what making good is included inside and out.

Be wary of pressured sales tactics, such as heavy discounts that expire the same day. A reputable company will give you a written quote and time to think. In England, check that the installer is registered with a competent person scheme such as FENSA or Certass, so the work can be self-certified and you receive a certificate when the job is done.

How long the work takes

After the survey, made-to-measure windows typically take a few weeks to manufacture, longer for timber and some aluminium colours. Fitting is quicker than most people expect. A team of two can usually replace several standard windows in a day, removing one opening at a time so the house is never left open for long. A whole house is often completed in one to three days.

Expect some dust and disruption around each window. The fitters cut out the old frame, fix the new one into the opening with packers and fixings, seal it inside and out and fit trims. Some plaster around the reveal may come away and need making good. Moving furniture and curtains away from the windows before the team arrives saves time on the day.

Questions people also ask

Are aluminium windows worth the extra cost?

They can be. Aluminium windows cost more than uPVC, typically £700–£1,400 per standard window, but give slimmer frames, more glass area, a wide colour choice and a strong, long-lasting profile. They suit modern homes and extensions. For a tight budget or a standard semi, uPVC usually offers better value.

Do new windows need a certificate?

In England, yes. Replacement windows are controlled work under Building Regulations. An installer registered with a competent person scheme such as FENSA or Certass can self-certify the work and register it, and you should receive a certificate. Keep it, as solicitors usually ask for it when you sell.

Can I replace just the glass instead of the whole window?

Often, yes. If the frame is sound and only the sealed unit has misted or cracked, replacing the glass unit costs £90–£250 per unit. This is far cheaper than a new window. Full replacement makes more sense if the frame is failing, locks are worn out or you want better performance.

Written and checked by the Windows and Doors team. Read our editorial policy.

Get a free windows and doors quote

Tell us what you need and we'll come back with a clear price.

Request a quote